Square Bale Pickers

Bale Claw Closeup

Simple one cylinder operation

  • 4 very solid lifting forks, 700mm long each
  • 14 claws 500mm long, 7 on each side
  • Can be fitted to any type of loader, tractor or telly handler
  • Claw positions can be adjusted up or down to suit your bale height and number being carried at once e.g. 2 of 4×4, 3 of 3×3 and 3×4
  • The claws do not damage your bales as they penetrate or retract because of their perfect shape that suits their travel radius

Once the claws are locked into your bales, it is very unlikely the bales will fall off, regardless of how rough the paddock or ground conditions are or even the angle of your fork frame.

With the 5000VE Bale Claw you will be able to drive your loader at a far more efficient speed and with a decent load on your forks, instead of having to be careful of losing your bales because of bouncing etc.

Your loading and unloading of trucks and stacks will become a safe operation with no more risk of rolling bales down your loader arms as you reach out and up to lift or place bales three at a time.